Adjustable tempering valve (PLX-4A8-180) with a range of 120°F to 160°F for Aqua-Hot hydronic heating systems. Mixes hot and cold water to deliver ...
View full details
Vented overflow cap with tether for Aqua-Hot and Hydro-Hot hydronic heating system expansion tanks. The vented design allows controlled pressure re...
View full detailsWater heater insulation blanket kit for supplemental insulation on Aqua-Hot and Hydro-Hot hydronic heating systems. Wraps around the heating unit t...
View full details
Sold out
Webasto 12-volt DC control box (WPX-287-962-S), also known as the Spheros box. This controller manages the full ignition and burn sequence for the ...
View full details
Save $7.93
Replacement 12-volt DC fuel solenoid valve (WPX-322-083) for Webasto DBW-2010 diesel burners. Controls the flow of diesel fuel to the burner nozzle...
View full details
12-volt preheat nozzle element for Webasto diesel burners. Preheats the fuel nozzle before ignition to ensure proper fuel atomization, especially d...
View full details
Save $9.98
Replacement 12-volt DC ignition coil (WPX-101-838) for the Webasto DBW-2010 diesel burner. Generates the high-voltage spark needed to ignite the fu...
View full details
Save $5.00
Webasto 2-banjo bolt service kit (MTRV-754-157) for DBW-2010 burners used in Aqua-Hot, Hydro-Hot, and other hydronic heating systems. Includes repl...
View full details
Replacement 24-volt DC ignition coil (WPX-101-846) for Webasto diesel burners in 24V systems. Delivers the high-voltage spark required for reliable...
View full details
Save $3.10
Genuine Webasto 6mm drive clutch half for the DBW-2010 burner assembly. Transfers rotational force from the blower motor to the combustion fan, ens...
View full details
Save $4.09
Bearing replacement kit (WPX-378-313) for the Webasto DBW-2010 diesel burner blower motor. Includes all bearings needed to restore smooth, quiet bl...
View full details
Save $4.05
Replacement blower casting housing (WPX-225-67A) for Webasto DBW-2010 diesel burners. Houses the combustion air blower fan and directs airflow into...
View full details
Lock washer for the Webasto DBW-2010 blower casting housing bolts. Prevents the blower casting mounting hardware from loosening due to vibration an...
View full details
O-ring seal (WPX-412-244) for the Webasto DBW-2010 blower casting housing. Creates an airtight seal between the blower housing and the burner head,...
View full details
Mounting screw (WPX-148-210) for the Webasto DBW-2010 blower casting housing. Secures the blower casting to the burner head assembly. Replace if th...
View full detailsPurpose: Bearing replacement, minimal tear-down Includes WPX-378-313 — Bearing Kit WPX-412-244 — Blower O-Ring Webasto burner bearing servic...
View full detailsComplete Webasto burner blower rebuild kit including bearings, clutch, seals, and grommets. Designed for high-hour units and full blower service. ...
View full detailsIncludes WPX-378-313 — Bearing Kit WPX-350-516 — 6mm Clutch Half (2 qty) WPX-412-244 — Blower O-Ring Recommended Webasto burner drive refresh ki...
View full details
Sale
Complete Webasto Burner Head 400 Series assembly for the DBW-2010 used in Aqua-Hot, Hydro-Hot, and other RV hydronic heating systems. This is the f...
View full details
Sale
⚠️ Manufacturer Special Order – Final SaleThis product is ordered directly from the manufacturer and is non-returnable.By purchasing this item, you...
View full details
C-plug wiring harness with built-in diode (WPE-434-79A) for Webasto DBW-2010 burners. Provides the electrical connection between the burner and the...
View full details
Save $5.88
The WPX-434-795 C-Plug Harness is an electrical connector assembly designed for DBW-2010 heating units in both 12V and 24V configurations. This wir...
View full details
Mounting screw (WPX-470-562) for securing the ignition coil to the Webasto DBW-2010 burner assembly. Ensures the coil stays firmly in place during ...
View full details
